R&S FSMR3000, User Manual

Page: 276 / 733

General Instrument Setup
R&S
®
FSMR3000
276 User Manual 1179.0116.02 ─ 02
Deactivating and Activating the Touchscreen ............................................................. 276
Display Update Rate ................................................................................................... 276
Set Date and Time ...................................................................................................... 276
Date and Time Format ................................................................................................ 277
Deactivating and Activating the Touchscreen
The touchscreen function can be deactivated, e.g. when the instrument is being used
for demonstration purposes and tapping the screen must not provoke an action.
To reactivate the touchscreen, simply press the [Setup] key on the front panel. The
"Display" dialog box is opened automatically and the "Touch Screen" option is set to
"On".
"Touch On"
Touchscreen function is active for the entire screen.
"Touch Off" Touchscreen is deactivated for the entire screen.
"Touch Diagram Off"
Touchscreen is deactivated for the diagram area of the screen, but
active for the surrounding softkeys, toolbars and menus.
Remote command:
DISPlay:TOUChscreen[:STATe]
on page 602
Display Update Rate
By default, a fast update rate ensures the most recent measurement results on the dis-
play. However, when performance is poor due to slow data transfer (for example during
remote control), it can be helpful to decrease the frequency with which the screen dis-
play is updated.
Set Date and Time
Sets the current date and time for the internal real-time clock on the instrument. This
function uses the standard Windows "Date and Time Properties" dialog box. Setting
the clock requires administrator rights.
Display Settings