R&S FSMR3000, User Manual

Page: 247 / 733

Data Management
R&S
®
FSMR3000
247 User Manual 1179.0116.02 ─ 02
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 9.3.2.2, "Storage Location and
Filename" , on page 244.
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
MMEMory:COMMent
on page 563
File Explorer
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
File Type
Determines whether the global instrument settings with all "Channel"s are stored or
recalled, or the current "Channel" settings only.
Items:
Defines which data and settings are stored or are recalled. Depending on the "File
Type", either channels only, or global settings are available. Which items are available
also depends on the installed options (see also
Chapter 9.3.2.1, "Stored Data Types" ,
on page 244).
Depending on the application, items may or may not be available. For example, saving
spectrogram data is only possible in applications that feature a spectrogram.
Remote command:
MMEMory:SELect[:ITEM]:ALL
on page 567
MMEMory:SELect[:ITEM]:DEFault
on page 567
MMEMory:SELect[:ITEM]:NONE
on page 568
MMEMory:SELect[:ITEM]:HWSettings
on page 567
MMEMory:SELect[:ITEM]:LINes:ALL
on page 568
MMEMory:SELect[:ITEM]:SGRam
on page 569
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 569
MMEMory:SELect[:ITEM]:TRANsducer:ALL
on page 569
Save File
Saves the settings file with the defined filename.
Note: Secure user mode. In secure user mode, settings that are stored on the instru-
ment are stored to volatile memory, which is restricted to 256 MB. Thus, a "memory
limit reached" error can occur although the hard disk indicates that storage space is
still available.
For details, see
Chapter 9.2, "Protecting Data Using the Secure User Mode" ,
on page 238.
Remote command:
MMEMory:STORe<1|2>:STATe
on page 573
MMEMory:STORe<1|2>:STATe:NEXT
on page 573
Storing and Recalling Instrument Settings and Measurement Data