Common Analysis and Display Functions
R&S
®
FSMR3000
226
User Manual 1179.0116.02 ─ 02
Single Sweep / Run Single
While the measurement is running, the "Single Sweep" softkey and the [RUN SINGLE]
key are highlighted. The running measurement can be aborted by selecting the high-
lighted softkey or key again.
Note:
Sequencer. Furthermore, the [RUN SINGLE] key controls the Sequencer, not
individual sweeps. [RUN SINGLE] starts the Sequencer in single mode.
If the Sequencer is off, only the evaluation for the currently displayed channel is upda-
ted.
Remote command:
Clear Spectrogram
Resets the spectrogram result display and clears the history buffer.
This function is only available if a spectrogram is selected.
Remote command:
CALCulate<n>:SPECtrogram:CLEar[:IMMediate]
Color map settings
Access
: "Overview" > "Analysis" > "Traces" > "Spectrogram" > "Color Mapping"
or
: [TRACE] > "Spectrogram Config" > "Color Mapping"
In addition to the available color settings, the dialog box displays the current color map
and provides a preview of the display with the current settings.
Figure 8-11: Color Mapping dialog box
Trace Configuration
