R&S FSMR3000, User Manual

Page: 123 / 733

Common Measurement Settings
R&S
®
FSMR3000
123 User Manual 1179.0116.02 ─ 02
Generated signal input
In order to use the functions of the external generator, an appropriate generator must
be connected and configured correctly. In particular, the generator output must be con-
nected to the RF input of the R&S
FSMR3.
External reference frequency
In order to enhance measurement accuracy, a common reference frequency should be
used for both the R&S
FSMR3 and the generator. If no independent 10 MHz reference
frequency is available, it is recommended that you connect the reference output of the
generator with the reference input of the R&S
FSMR3 and that you enable usage of
the external reference on the R&S FSMR3 via "SETUP" > "Reference" > "External Ref-
erence".
Connection errors
If no external generator is connected, if the connection address is not correct, or the
generator is not ready for operation, an error message is displayed (e.g."Ext. Genera-
tor TCPIP Handshake Error!", see
"Displayed Information and Errors" on page 127).
Overview of Supported Generators
Generator
type Model Driver file TTL sup-
port Generator type Model Driver file TTL sup-
port
SGS100A 6 GHz SGS100A6 - SMJ 3 GHz SMJ03 X
12 GHz SGS100A12 - 6 GHz SMJ06 X
SGT100A 3 GHz SGT100A3 - SML 1 GHz SML01 -
6 GHz SGT100A6 - 2 GHz SML02 -
SMA01A 3 GHz SMA01A 1) X 3 GHz SML03 -
SMA100A 3 GHz SMA100A3 X SMP 2 GHz SMP02 X
6 GHz SMA100A6 X 3 GHz SMP03 X
SMA100B 3 GHz SMA100B3 X 4 GHz SMP04 X
6 GHz SMA100B6 X 22 GHz SMP22 X
12 GHz SMA100B12 X SMR 20 GHz SMR20 -
20 GHz SMA100B20 X 20 GHz
SMR20B11
3) X
32 GHz SMA100B32 X 27 GHz SMR27 X
40 GHz SMA100B40 X 27 GHz
SMR27B11 3)
X
50 GHz SMA100B50 X 30 GHz SMR30 X
1) Requires firmware version V2.10.x or later on the signal generator
2) Requires firmware version V1.10.x or later on the signal generator
3) Requires the option SMR-B11 on the signal generator
4) Requires firmware version V3.20.200 or later on the signal generator
Input and Frontend