Remote commands for Multi CISPR APD measurements
R&S
®
ESW-K58
96
User Manual 1179.0880.02 ─ 03
Parameters:
<Value>
<numeric value>
Default unit: Depends on the result display.
Example:
//Define x-axis level range
DISP:TRAC:x:AUTO OFF
DISP:TRAC:x:MIN -10DBM
DISP:TRAC:x:MAX -110DBM
Manual operation:
See
"Scaling according to min and max values"
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:MINimum
<Value>
This command defines the minimum value displayed on the vertical diagram axis.
Suffix:
<n>
.
<w>
<t>
irrelevant
Parameters:
<Value>
Minimum displayed value. The unit and value range depend on
the selected diagram.
Example:
//Define minimum value on y-axis in subwindow 2 of window 2
DISP:WIND2:SUBW2:TRAC:Y:MIN -50
Manual operation:
See
"Scaling according to min and max values"
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:MAXimum
<Value>
This command defines the maximum value displayed on the y-axis of a diagram.
Suffix:
<n>
.
<w>
<t>
irrelevant
Parameters:
<Value>
Maximum displayed value. The unit and value range depend on
the selected diagram.
Example:
//Define maximum value on y-axis in subwindow 2 of window 2
DISP:WIND2:SUBW2:TRAC:Y:MAX 0
Manual operation:
See
"Scaling according to min and max values"
Analysis