R&S ESR Series, User Manual

Page: 969 / 1126

Remote Control
R&S
®
ESR
966 User Manual 1175.7068.02 ─ 12
11.13 Working with Test Reports
● Designing a Test Report Template ........................................................................ 966
● Creating a Test Report .......................................................................................... 973
● Deprecated Commands (Test Report) .................................................................. 976
11.13.1 Designing a Test Report Template
● Selecting the Test Report Contents .......................................................................966
● Designing the Header of the Test Report ..............................................................968
● Defining the Contents of the Title Page ................................................................ 971
● Managing Templates .............................................................................................972
11.13.1.1 Selecting the Test Report Contents
HCOPy:TREPort:ITEM:DEFault
.......................................................................................966
HCOPy:TREPort:ITEM:SELect
........................................................................................ 966
HCOPy:TREPort:ITEM:DEFault
This command restores the default configuration of the test report regarding the infor-
mation that is part of the report (in the "Configuration" tab of the "Test Report Settings"
dialog box).
It also restores the default names of the header titles (in the "Header" tab of the "Test
Report Settings" dialog box).
Example: HCOP:TREP:ITEM:DEF
Restores the default test report configuration.
Usage: Event
HCOPy:TREPort:ITEM:SELect '<Item>,<Item>,<Item>,...'
This command defines the type of information that a test report is made up out of.
Parameters:
<Item> String containing the information you want to include in the test
report.
Note that the items, separated by commas, have to be written
into one string (see example below).
The available items depend on the application you are using.
See the tables below for a short description of each item.
Per default, some items are selected (see tables below).
Example: HCOP:TREP:ITEM:SEL 'SETT,MARK,SRES,DIAG'
Each dataset consists of the measurement settings, marker
information, the scan results and a screenshot of the scan trace
(for Receiver channels).
Working with Test Reports