Remote Control
R&S
®
ESR
950
User Manual 1175.7068.02 ─ 12
Managing a transducer set
//Select or create a transducer set
CORR:TSET:SEL 'Transducer Set'
//Define a comment for the transducer set
CORR:TSET:COMM 'Transducer set example'
//Define a unit for the transducer set
CORR:TSET:UNIT 'DB'
//Turn the transducer break on
CORR:TSET:BRE ON
//Define the first transducer range
CORR:TSET:RANG1 150KHZ,1MHZ,'Transducer 1','Transducer 3'
CORR:TSET:RANG2 1MHZ,10MHZ,'Transducer 3','Transducer 4'
CORR:TSET:RANG3 10MHZ,30MHZ,'Transducer 3'
//Turn on the transducer set
CORR:TSET ON
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe]
.............................................. 950
[SENSe:]CORRection:TRANsducer:ACTive?
.................................................................... 951
[SENSe:]CORRection:TRANsducer:CATalog?
...................................................................951
[SENSe:]CORRection:TRANsducer:COMMent
..................................................................951
[SENSe:]CORRection:TRANsducer:DATA
........................................................................ 952
[SENSe:]CORRection:TRANsducer:DELete
......................................................................952
[SENSe:]CORRection:TRANsducer:SCALing
....................................................................952
[SENSe:]CORRection:TRANsducer:SELect
...................................................................... 953
[SENSe:]CORRection:TRANsducer[:STATe]
..................................................................... 953
[SENSe:]CORRection:TRANsducer:UNIT
.........................................................................953
[SENSe:]CORRection:TRANsducer:VIEW
........................................................................ 954
.................................................................................954
[SENSe:]CORRection:TSET:CATalog?
............................................................................. 954
[SENSe:]CORRection:TSET:COMMent
............................................................................ 955
[SENSe:]CORRection:TSET:DELete
................................................................................ 955
[SENSe:]CORRection:TSET:RANGe<range>
....................................................................955
[SENSe:]CORRection:TSET:SELect
.................................................................................956
[SENSe:]CORRection:TSET[:STATe]
................................................................................956
................................................................................... 956
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe]
<State>
This command turns automatic adjustment of the reference level regarding the trans-
ducer factor characteristics on and off.
Before you can use the command, you have to select a transducer factor with
[SENSe:]CORRection:TRANsducer:SELect
.
Parameters:
<State>
ON
Automatically adjusts the reference level with respect to the
transducer factor characteristics.
OFF
Manual adjustment of the reference level with respect to the
transducer factor characteristics is necessary.
Using Transducers
