Remote Control
R&S
®
ESR
942
User Manual 1175.7068.02 ─ 12
MMEMory:CDIRectory
<Directory>
This command changes the current directory.
Parameters:
<Directory>
<directory_name>
<directory_name>
DOS path name
In addition to the path name, the indication of the directory may
contain the drive name. The path name complies with the DOS
conventions.
Example:
MMEM:CDIR 'C:\R_S\Instr\user'
Selects the directory C:\R_S\Instr\user.
Usage:
SCPI confirmed
Manual operation:
See
MMEMory:COMMent
<Comment>
This command defines a comment for the stored settings.
Parameters:
<Comment>
Example:
MMEMory:COMMent "ACP measurement with Standard
Tetra from 23.05."
MMEMory::MMEMory:STORe1:STATe 1, "ACP_T"
As a result, in the selection list for recall settings, the comment
"ACP measurement with Standard Tetra from
23.05."
is added to the ACP entry.
Usage:
SCPI confirmed
MMEMory:COPY
<FileSource>,<FileDestination>
This command copies the files indicated in <file_source> to the destination directory
indicated with <file_destination> or to the destination file indicated by <file_destination>
if <file_source> is just a file.
Parameters:
<FileSource>,<FileDestination>
<file_source>,<file_destination> = <file_name>
<file_source>,<file_destination> = <file_name>
DOS file name
The indication of the file name may include the path and the
drive name. The file names and path information must be in
accordance with the DOS conventions.
Example:
MMEM:COPY 'C:\R_S\Instr\user\SETUP.CFG','E:'
Usage:
Event
SCPI confirmed
Data Management
