R&S ESR Series, User Manual

Page: 652 / 1126

Remote Control
R&S
®
ESR
649 User Manual 1175.7068.02 ─ 12
[SENSe:]DEMod:SQUelch[:STATe] <State>
This command turns selective demodulation at the marker position on and off.
A video trigger is automatically activated with the same level as the squelch level, any
other trigger or gate settings are deactivated.
This command in only available if the R&S FSV-B3 option (Audio Demodulation) is
installed.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: DEM:SQU ON
Signals below the level threshold are not sent to the audio out-
put.
Usage: SCPI confirmed
Manual operation: See "Squelch" on page 164
See "Squelch" on page 421
11.4.1.8 Spectrogram Control
● Configuring Spectrograms .................................................................................... 649
● Using Markers .......................................................................................................653
● Using Deltamarkers ...............................................................................................659
Configuring Spectrograms
CALCulate<n>:SGRam:CLEar[:IMMediate]
.......................................................................649
DISPlay:WINDow:SGRam:COLor:DEFault
....................................................................... 650
DISPlay:WINDow:SGRam:COLor:LOWer
.........................................................................650
DISPlay:WINDow:SGRam:COLor:SHAPe
........................................................................ 650
DISPlay:WINDow:SGRam:COLor:UPPer
..........................................................................650
DISPlay:WINDow:SGRam:COLor[:STYLe]
....................................................................... 651
CALCulate<n>:SGRam:HDEPth
...................................................................................... 651
CALCulate:SGRam:TRACe
.............................................................................................651
CALCulate<n>:SGRam:TSTamp:DATA?
...........................................................................652
MMEMory:STORe:SGRam
............................................................................................. 652
CALCulate<n>:SGRam:CLEar[:IMMediate]
This command resets the Spectrogram result display and clears the history buffer.
Suffix:
<n>
.
1...4
Selects the measurement window.
Example: CALC:SGR:CLE
Resets the result display and clears the memory.
Usage: Event
Remote Commands in Receiver Mode