R&S ESR Series, User Manual

Page: 548 / 1126

Data Management and Documentation
R&S
®
ESR
545 User Manual 1175.7068.02 ─ 12
●
"Set to Default" on page 545
Select Print Color Set ← Colors
For details see "Select Print Color Set" on page 523 softkey of the "Setup" menu.
Color (On/Off) ← Colors
For details see "Color (On/Off)" on page 522 softkey of the "Setup" menu.
Select Object ← Colors
For details see "Select Object" on page 522 softkey of the "Setup" menu.
Predefined Colors ← Colors
For details see "Predefined Colors" on page 522 softkey of the "Setup" menu.
User Defined Colors ← Colors
For details see "User Defined Colors" on page 522 softkey of the "Setup" menu.
Set to Default ← Colors
For details see "Set to Default" on page 522 softkey of the "Setup" menu.
Comment
Opens dialog box to enter a comment. Max. 120 characters are allowed. 60 characters
fit in one line. In the first line, at any point a manual line-feed can be forced by entering
"@".
Date and time are inserted automatically. The comment is printed below the diagram
area, but not displayed on the screen. If a comment should not be printed, it must be
deleted.
For details on the alphanumeric entries refer to Chapter 3.4.3.2, "Entering Alphanu-
meric Parameters" , on page 78.
Remote command:
HCOPy:ITEM:WINDow:TEXT
on page 962
Install Printer
Opens the "Printers and Faxes" window to install a new printer. All printers that are
already installed are displayed.
For further information refer to Chapter 3.2.4.6, "Selecting and Configuring Printers" ,
on page 54.
Only user accounts with administrator rights can install a printer.
Report
Provides access to the test report tool. For more information see Chapter 10.3, "Work-
ing with Test Reports" , on page 546.
Measurement Documentation – PRINT Key