R&S ESR Series, User Manual

Page: 521 / 1126

System Configuration
R&S
®
ESR
518 User Manual 1175.7068.02 ─ 12
Display Update (On/Off) ← GPIB ← General Setup
Defines whether the instrument display is switched off when changing from manual
operation to remote control. In remote control mode, this softkey is displayed in the
local menu.
Remote command:
SYSTem:DISPlay:UPDate
on page 921
GPIB Terminator LFEOI/EOI ← GPIB ← General Setup
Changes the GPIB receive terminator.
According to the standard, the terminator in ASCII is <LF> and/or <EOI>. For binary
data transfers (e.g. trace data) from the control computer to the instrument, the binary
code used for <LF> might be included in the binary data block. Therefore, it should not
be interpreted as a terminator in this particular case. This can be avoided by changing
the receive terminator to EOI.
Remote command:
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator
on page 989
*IDN Format Leg./New ← GPIB ← General Setup
Defines the response format to the
*IDN?
remote command (see
*IDN?
on page 916). This function is intended for re-use of existing control programs
together with the R&S
ESR.
"Leg" Legacy format, compatible to the R&S FSP/FSU/FSQ family
e.g.
Rohde&Schwarz,FSV-7,100005/007,1.61
"New" R&S ESR format
e.g.
Rohde&Schwarz,FSV-7,1307.9002K07/100005,1.61
Remote command:
SYSTem:FORMat:IDENt
on page 921
I/O Logging (On/Off) ← GPIB ← General Setup
Activates or deactivates the SCPI log function. All remote control commands received
by the R&S
ESR are recorded in the following log file:
C:\R_S\Instr\scpilogging\ScpiLog.txt
Logging the commands can be extremely useful for debug purposes, e.g. to find mis-
spelled keywords in control programs.
Remote command:
SYSTem:CLOGging
on page 920
Time+Date ← General Setup
Opens an edit dialog box to enter time and date for the internal real-time clock.
For details, refer to Chapter 3.2.4.2, "Setting the Date and Time" , on page 49.
Remote command:
SYSTem:TIME
on page 923
SYSTem:DATE
on page 924
Instrument Setup and Interface Configuration – SETUP Key