R&S ENV4200, User Manual

Page: 11 / 29

Instrument tour
R&S
®
ENV4200
11 User Manual 1107.2470.12 ─ 04
2.1.5 Test receiver
N socket (50
Ω
) for connecting to the test receiver.
See Chapter 4.4, "Connecting the test receiver" , on page 19 and (5) in Figure 2-1 .
2.1.6 Ground sockets
4 mm banana sockets to connect to the reference mass during calibration.
See (6) in Figure 2-1 .
2.1.7 Protective conductor terminal
M10 threaded bolt for connecting the protective earth conductor of the equipment
under test.
See Chapter 4.1, "Connecting to protective ground" , on page 17 and (7) in Figure 2-1 .
2.1.8 Artificial hand
4 mm banana socket to connect an artificial hand to imitate the influence of the hand of
the user during measurement of the interference voltage.
See (8) in Figure 2-1 .
2.2 Rear panel view
This illustration displays the rear view of the R&S ENV4200. The individual elements
are described in detail in the following sections.
Rear panel view