Interfaces and Connectors
R&S
®
DVMS1
14
Getting Started 2113.7619.02 ─ 12
3.1.1.2
INSTRUMENT READY
Displays the status of the R&S
DVMS.
●
LED off: R&S
DVMS is not ready for operation.
For example, after powering up until the startup process is completed; the LED sta-
tus display changes thereafter.
●
LED green: R&S
DVMS is ready for operation.
●
LED yellow: R&S
DVMS is not ready for operation because the main application,
TS analyzer, is not running (e.g. has been stopped).
3.1.1.3
REMOTE
Displays the remote control status within the last second.
●
LED off: R&S
DVMS is not used for remote control.
●
LED green: R&S
DVMS is remote controlled.
●
LED yellow: R&S
DVMS is sending SNMP traps.
3.1.2
Connectors
3.1.2.1
AF OUT (Headphones)
The jack socket for the L/R analog audio output provides the decoded audio stream of
the VLC software decoder as a stereo signal.
The socket is intended for connecting headphones or an active loudspeaker.
3.2
Rear Panel
This chapter gives a short overview of the connectors on the rear panel.
The option module depends on your choice. In this chapter, all available option mod-
ules are described.
Rear Panel
