R&S CMW-KG8 Series, User Manual

Page: 98 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
98 User Manual 1173.9511.02 ─ 11
AT Forward Packet Activity
Percentage of forward packets that the R&S CMW directs to the AT under test. In gen-
eral, the AT forward packet activity is set to an integer fraction of 100 %, e.g. 100 %,
50 %, 25 %.
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
NETWork:
​
PROPerty:
​
FPACtivity
​
Inter RAT Enable
Flag enables such inter RAT operability as e.g. handoff.
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
NETWork:
​
PROPerty:
​
IRAT
​
2.4.9.3 Sector 0
The following parameters define information of the R&S CMW's sector. The information
is transmitted in the SectorParameter message; see standard 3GPP2 C.S0024-B.
Fig. 2-46: Sector
PN Offset .......................................................................................................................98
Color Code .................................................................................................................... 99
Subnet Mask ................................................................................................................. 99
Country Code ................................................................................................................ 99
Format ...........................................................................................................................99
ANSI-41 .........................................................................................................................99
└ Sector ID [Bits 23 ... 0] .................................................................................. 100
└ Number P-Bits ...............................................................................................100
└ Overall ID [Bits 127 ... 0] ............................................................................... 100
Manual > Sector ID [Bits 127 ... 0] .............................................................................. 100
PN Offset
Pilot PN offset index of the generated forward 1xEV-DO signal, indicates the timing of
the sector's short codes relative to the system time (zero-offset PN sequence). The PN
offset is measured in units of 64 pseudo-noise (PN) chips. The range of PN offset indi-
ces is 0 to 511. Different base stations are identified by different PN offsets; therefore,
the AT must be able to determine the PN offset of a base station.
GUI Reference
深圳德标仪器
135-1095-0799