CDMA2000 Generator
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
936
User Manual 1173.9511.02 ─ 11
CDMA Power
Sets the total CDMA output power. The value range depends on the RF input used and
the external attenuation set. The "CDMA Power" level does not include the AWGN
power level.
Remote command:
Peak Output Power
Shows the value of the maximum output power that occurs during one transmission
slot. The "Peak Output Power" is in correlation to the level of the forward channels.
Remote command:
OCNS
Activates or deactivates the Orthogonal Channel Noise Simulator (OCNS) channels
and displays the total OCNS channel power relative to the value of "CDMA Power".
The OCNS simulates the users or control signals on the other orthogonal channels of
the forward link.
OCNS channels are generated if the total power of all active channels is smaller than
the value of "CDMA Power". The remaining power is assigned to the OCNS channels
so that the value of "CDMA Power" is reached.
Remote command:
Channels – Level
Defines the level of a physical channel relative to the
. For details about
Remote command:
Channels – Channel
Defines the channelization code of the corresponding channel. The CDMA2000 stand-
ard defines fixed channelization codes for the channels F-PICH and F-Sync.
See also:
Remote command:
GUI Reference
深圳德标仪器
