R&S CMW-KG8 Series, User Manual, Page: 747 / 964

CDMA2000 Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
747 User Manual 1173.9511.02 ─ 11
Fig. 5-20: Configuration: signal routing and analyzer settings
Scenario / Controlled By ............................................................................................. 747
Connector, Converter ..................................................................................................748
External Attenuation (Input) ........................................................................................ 748
Band / Channel / Frequency ....................................................................................... 748
Frequency Offset .........................................................................................................749
Expected Nominal Power ............................................................................................749
User Margin .................................................................................................................749
Radio Configuration .................................................................................................... 750
Scenario / Controlled By
Scenario switches between certain test situations that require different sets of parame-
ters. Some parameters are only available for a specific scenario.
Selects the measurement scenario. The CDMA2000 TX measurement can either be
used standalone or in conjunction with the CDMA2000 signaling application (option
R&S CMW-KS800). In the latter case, the signaling application configures signal rout-
ing and analyzer settings. The measurement settings described in this section are then
ignored.
●
StandAlone (Non Signaling): provides you the non-signaling CDMA2000 mea-
surement, using all CDMA2000 measurement settings.
●
Combined Signal Path: allows you to use a CDMA2000 signaling application
(options R&S CMW-KS800) in combination with CDMA2000 measurement. The
signaling application is selected by the additional parameter "Controlled by".
The parameters described in this section display values determined by the signal-
ing application. The corresponding measurement settings are remembered in the
background and displayed again when switching back to the standalone scenario.
For more details see
Combined Signaling and Measurement .
Remote command:
ROUTe:
​
CDMA:
​
MEAS<i>?
​
ROUTe:
​
CDMA:
​
MEAS<i>:
​
SCENario?
​
ROUTe:
​
CDMA:
​
MEAS<i>:
​
SCENario:
​
SALone
​
ROUTe:
​
CDMA:
​
MEAS<i>:
​
SCENario:
​
CSPath
​
GUI Reference
深圳德标仪器
135-1095-0799