R&S CMW-KG8 Series, User Manual

Page: 561 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
561 User Manual 1173.9511.02 ─ 11
4.3.9.7 Registration
This section defines settings of the registration procedure.
Timer Based Registration is available with the basic signaling application R&S CMW-
KS800. All other registration types require the advanced signaling option R&S CMW-
KS810.
Fig. 4-54: Registration settings
Timer-based Registration ............................................................................................561
Distance-based Registration ....................................................................................... 562
Autonomous Registration (Home / Foreign SID / Foreign NID) .................................. 562
Power-up Registration .................................................................................................562
Power-down Registration ............................................................................................ 562
Parameter-change Registration .................................................................................. 563
Timer-based Registration
Timer-based registration causes the mobile station to register at regular intervals. Its
use also allows the system to automatically deregister mobile stations that did not per-
form a successful power-down registration.
This is an autonomous registration; see Autonomous Registration (Home / Foreign
SID / Foreign NID)
The interval is controlled by the base station via the REG_PRD field of the System
Parameters Message or ANSI-41 System Parameters Message. If timer-based regis-
tration shall be performed, this field shall be set to a value in the range 29 to 85 inclu-
sive and the timer value is determined by the following formula:
[2
REG_PRD/4
]x0.08 s
This results in intervals from approximately 12 seconds to 3 days
Remote command:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
NETWork:
​
REGistration:
​
TBASed
​
GUI Reference
深圳德标仪器
135-1095-0799