R&S CMW-KG8 Series, User Manual

Page: 52 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
52 User Manual 1173.9511.02 ─ 11
3. To initiate the handoff press the "Handoff" button in the dialog.
When the handoff has been completed, the 1xEV-DO state remains "Connected".
The event log display in the main view shows the beginning and ending of the
handoff with separate log entries.
2.4 GUI Reference
The following sections provide detailed reference information on the parameters of the
1xEV-DO signaling application. Most of the signaling parameters are arranged in the
"1xEV-DO Signaling Configuration" dialog. Additional dialogs allow to configure the
measurements included in the signaling application.
Many of the signaling parameters are available in a subset of connection states only
(e.g. handoff is only possible when a connection is established). Temporarily unavaila-
ble parameters are grayed out in the configuration dialogs; hotkeys appear and disap-
pear dynamically, depending on the connection state.
The screenshots in this chapter show the GUI with all available options installed.
Depending on the installed options some parameters may not be configurable (display
the default value) or may not be visible at all. This is indicated in the parameter
description.
The GUI reference is structured as follows.
● Signaling View .........................................................................................................53
● Signaling Control .....................................................................................................59
● Using the Shortcut Softkeys ....................................................................................61
● General Settings ..................................................................................................... 62
● I/Q Settings ............................................................................................................. 63
GUI Reference
深圳德标仪器
135-1095-0799