WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
197
User Manual 1173.9657.02 ─ 11
TimeOut of T3212/T3312 ← Network
Timer "T3212" controls the initiation of a periodic location area update by the UE. It is
set in multiples of 6 minutes. If 0 is set, no periodic location area update is required.
Timer "T3312" controls the initiation of a periodic routing area update by the UE. It is
set in multiples of 2 seconds. If 0 is set, no periodic routing area update is required.
Option R&S CMW-KS410 required.
Remote command:
TimeOut of OutOfSynch ← Network
The "OutOfSynch" timer specifies the time after which the instrument, having waited for
a signal from the connected UE, releases the connection and returns to state Regis-
tered.
Option R&S CMW-KS410 required.
Remote command:
Paging Repetitions ← Network
This counter limits the number of paging procedures to be performed if no answer is
received from the UE. Paging is repeated until the specified number of paging repeti-
tions is reached. Then the call setup is aborted.
Option R&S CMW-KS410 required.
Remote command:
Paging Indications per Frame ← Network
Number N
p
of paging indicators that the R&S
CMW transmits in each PICH frame.
According to 3GPP TS 25.211, this number equals 18, 36, 72, or 144. The parameter
N
p
occurs in 3GPP TS 34.121, e.g. in section "Demodulation of Paging Channel
(PCH)".
Option R&S CMW-KS410 required.
Remote command:
Activation Time Offset ← Network
Delay used by the RRC for calculation of the activation time in peer messages, e.g. for
channel changes within the band.
A low value results in fast signaling, a high value in slow signaling. If your UE does not
support fast signaling, increase the value.
Remote command:
UE
Configures the UE related timers and constants.
GUI Reference
深圳德标仪器
135-1095-0799
