WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
180
User Manual 1173.9657.02 ─ 11
Fig. 2-73: Miscellaneous connection configuration settings
UE term. Connection
Selects the connection type to be used for UE terminated connections initiated by the
instrument.
In reduced signaling mode only test mode connections are supported.
●
Voice
: The instrument uses a Signaling Radio Bearer (SRB) to set up a connection
and allocate a voice channel. The connection path is selected via
selection.
For configuration see
chapter 2.4.11.2, "Voice Connection Settings"
●
Video
: The instrument uses an SRB to set up a circuit switched video call and
loops back the received video data including audio to the UE.
●
SRB only
: The instrument uses an SRB to establish and maintain the connection.
For configuration see
chapter 2.4.11.4, "SRB Connection Settings"
●
Test Mode
: The instrument uses an SRB to set up a test mode connection. Four
test mode types are available: RMC, HSPA, RMC + HSPA and FACH. For test
mode types with RMC the SRB is established in the CS domain. For type "HSPA"
the SRB is established in the PS domain. Test using CELL_FACH state is imple-
mented in CS domain.
For configuration see
chapter 2.4.11.5, "Test Mode Connection Settings"
Remote command:
SRB Data Rate
Selects the signaling radio bearer (SRB) data rate. This setting applies to the connec-
tion types Voice, Video and SRB only. For RMC connections a fixed value of 2.5 kbps
is used for uplink and downlink. For test mode type "HSPA" a fixed value of 3.4 kbps is
used.
Remote command:
Caller ID
Sets the calling party number of the R&S
CMW to be displayed at the UE as defined in
3GPP TS 24.008.
This parameter is suspended in the state CEST (connection established).
Remote command:
GUI Reference
深圳德标仪器
