WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
111
User Manual 1173.9657.02 ─ 11
Additional information about established connections is provided in the UE Info, see
Remote command:
CMW Demod. Info
This information is available while the demodulator stage of the instrument perceives
an uplink signal and can be used for troubleshooting.
The text to the left indicates whether the uplink signal power is in range, too high (over-
flow) or too low (underflow). The text to the right indicates whether the R&S
CMW was
able to synchronize to the uplink signal (In Sync) or not (No Sync).
Remote command:
2.4.1.2
Event Log
The event log area reports events and errors like connection state changes, RRC con-
nection establishment/release, and authentication failure.
Fig. 2-29: Event log in the main view
Event Log
Displays the timestamp, entry type and description of an event. The type of each entry
is indicated by an icon:
= information, warning, and error.
Remote command:
2.4.1.3
UE Measurement Report
To display the measurement report information, select "UE Measurement Report" in
the field below the event log area.
Use the checkbox to enable/disable measurement reports. Press the button to the right
to maximize the UE measurement report area.
This section is not relevant for reduced signaling.
The individual report values are defined in 3GPP TS 25.133.
GUI Reference
深圳德标仪器
135-1095-0799
