R&S AREG800A, User Manual

Page: 381 / 411

Maintenance, storage and disposal
R&S
®
AREG800A
381 User Manual 1179.3615.02 ─ 01
Note: By typing the first letter, you can quickly navigate through the lists to find the
desired destination.
Remote command:
:SYSTem:TIME:ZONE
on page 302
:SYSTem:TIME:ZONE:CATalog?
on page 303
NTP Address
Sets the IP address or host name of the NTP server.
NTP is a network time protocol used for synchronizing all participating devices in a
data network.
You can select a high-precision time server to reduce the impact of varying network
delays.
Remote command:
:SYSTem:NTP:HOSTname
on page 302
Use Time from NTP Server
Activates clock synchronization of the network via the NTP protocol.
Remote command:
:SYSTem:NTP:STATe
on page 302
14.3.2.2 How to set data and time
To select the timezone
1. Press the [Setup] key.
2. Select "Maintenance > Date /Time > Timezone".
3. Select continent and city of your location.
Tip: By typing the first letter, you can quickly navigate through the lists to find the
desired destination.
4. Close the dialogs.
The instrument adjusts the time according to the selected location.
To set the date and time
1. Press the [Setup] key.
2. Select "Security > Protection".
3. Enable the "Protection Level 1".
The default password is 123456 .
4. Select "Setup > Maintenance > Date / Time".
5. Adjust the settings.
Performing maintenance tasks