R&S AREG800A, User Manual

Page: 302 / 411

Remote control commands
R&S
®
AREG800A
302 User Manual 1179.3615.02 ─ 01
Manual operation: See "Date" on page 380
:SYSTem:NTP:HOSTname <NTPName>
Sets the address of the NTP server. You can enter the IP address, or the hostname of
the time server, or even set up an own vendor zone. See the Internet for more informa-
tion on NTP.
Parameters:
<NTPName> string
Manual operation: See "NTP Address" on page 381
:SYSTem:NTP:STATe <UseNtpState>
Activates clock synchronization via NTP.
Parameters:
<UseNtpState> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 0)
Example:
SYSTem:NTP:STATe 1
Manual operation: See "Use Time from NTP Server" on page 381
:SYSTem:TIME <Hour>, <Minute>, <Second>
Queries or sets the time for the instrument-internal clock.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<Hour> integer
Range:
0 to 23
<Minute> integer
Range:
0 to 59
<Second> integer
Range:
0 to 59
Example:
SYSTem:TIME?
// 10,27,14
Manual operation: See "Time" on page 380
:SYSTem:TIME:ZONE <TimeZone>
Sets the timezone. You can query the list of the available timezones with
:SYSTem:
TIME:ZONE:CATalog?
.
Parameters:
<TimeZone> string
SYSTem subsystem