R&S AFQ100A
Equalizer Block
1401.3084.32 4.48
E-3
Frequency Entry Mode
Selects the frequency entry mode. The frequency correction is
performed for a bandwidth of 200 MHz centred on the RF carrier.
Relative
Frequency values given in the table are interpreted as
relative to the carrier frequency. Negative frequency
values are possible.
Remote-control command:
SOUR:EQU:MOD:FEM REL
Absolute
Frequency values given in the table are interpreted as
absolute values. The carrier frequency must be
entered in the RF frequency field. The allowed range
is 200 MHz centred on the RF carrier.
Remote-control command:
SOUR:EQU:MOD:FEM ABS
RF Frequency
(Frequency entry mode absolute only)
Enters the RF carrier frequency.
Remote-control command:
SOUR:EQU:MOD:RFFR 1.4 GHZ
Editing Modulator Data
