R&S 1424.7005.02 User Manual Download Page 399

Page: 399 / 514

Remote Control Commands

R&S

NRX

399

User Manual 1178.5566.02 ─ 07

SYSTem:DFPRint

[<Path>]

Generates the device footprint.

Setting parameters:

<Path>

Return values:

SYSTem:DFPRint:HISTory:COUNt?

Queries the number of device footprints in the history.

Return values:

<Count>

Usage:

Query only

SYSTem:DFPRint:HISTory:ENTRy?

<index>

Queries a device footprint from the history.

Query parameters:

<index>

Most recent device footprint

Return values:

Usage:

Query only

SYSTem:INFO:TERMchar

Selects the termination characters for information returned by

SYSTem:INFO[:

INFO]?

Parameters:

CR | LF | CRLF | STRS
*RST:

STRS

SYSTem:INFO[:INFO]?

[<argument>]

Queries information on the R&S NRX. See

"System Info"

on page 153.

If queried without parameters, the command returns all available information in the
form of a list of strings separated by commas.

If you want to query specific information, add the query parameter:

SYST:INFO? "<string>"

System Information and Configuration

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 1424.7005.02



































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1424.7005.02

Reviews:

Related manuals for 1424.7005.02

Brands by name

Popular brands

R&S 1424.7005.02, User Manual

Search results

Summary of Contents for 1424.7005.02

Reviews:

Related manuals for 1424.7005.02

Brands by name

Popular brands