R&S 1332.4500K22, User Manual

Page: 948 / 1709

Command reference
R&S
®
ZNA
948 User Manual 1178.6462.02 ─ 20
CALCulate:FMODel:ISD<Ph_pt>:COUPon[:STATe] <Boolean>
For a fixture modeling with the ISD tool, this command allows to specify the ports to
which the test coupon is connected.
This has to be defined before measuring the test coupon (using
CALCulate:FMODel:
ISD<Ph_pt>:COUPon:MEASure
or
CALCulate:FMODel:ISD<Ph_pt>:COUPon:
MEASure:OPEN
and
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:SHORt
).
Suffix:
<Ph_pt>
.
Physical port number
Parameters:
<Boolean> 1 (ON, true) if the test coupon is connected to port <Ph_pt>, 0
(OFF, false) otherwise
Example: See Chapter 8.2.8, "Fixture modeling" , on page 1628
Manual operation: See "Active" on page 677
CALCulate:FMODel:ISD<Ph_pt>:DCEXtrapolat <Boolean>
Defines whether the de-/embedding file generated by the ISD tool contains (extrapola-
ted) DC data.
Can only be set to ON, if a recent version of the ISD tool (from 2019-12 or later) is
used. ON correspons to
add_dc=1
in the tool's batch mode.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<Boolean> OFF (0)
No DC data added, i.e. the touchstone data reach down to the
start frequency of the instrument sweep.
ON (1)
The ISD tool adds (extrapolated) S-parameter data for f = 0.
*RST:
OFF (0)
Manual operation: See "DC Extrapolation" on page 685
CALCulate:FMODel:ISD<Ph_pt>:DUT:MEASure
For a fixture modeling with the ISD tool, this command allows to measure DUT + Fix-
ture at the active ports (see
CALCulate:FMODel:ISD<Ph_pt>:DUT[:STATe]
)
Suffix:
<Ph_pt>
.
This suffix is ignored.
Example: See Chapter 8.2.8, "Fixture modeling" , on page 1628
Usage: Event
Manual operation: See "Measure" on page 678
SCPI command reference