GUI reference
R&S
®
ZNA
728
User Manual 1178.6462.02 ─ 20
Most of the mixer properties are straight-forward
Embedded LO
Select "Embedded LO" if in the related mixer measurement the LO cannot be provided
by the VNA or a connected external generator. Setting this flag makes the LO drive
power range read-only.
Embedded LO mixer group delay measurements
ZNA-
K9.
Use Fixed Freq
Uncheck "Use Fixed Freq" if you want the LO signal to vary in frequency, which will
enable "LO Freq Min" and "LO Freq Max". Otherwise only "LO Fixed Freq" is enabled.
5.17
Applic softtool
The "Applic" softtool gives access to applications and tools that extend the functionality
of the analyzer firmware.
Access:
System – [Applic]
Use the combo-box at the top of the softtool to load one of the available applications
and to display the softtool tabs related to this application.
Applic softtool
