GUI reference
R&S
®
ZNA
602
User Manual 1178.6462.02 ─ 20
Background information
Refer to
Chapter 4.7.25, "RFFE GPIO interface"
For more details about the voltage range, clock frequency ranges and their steps sizes,
refer to
Chapter 12.3.4, "RFFE - GPIO interface"
RFFE tab
The "RFFE" tab is divided into two parts:
●
The upper part gives access to the RFFE interface settings and allows manual
command execution and result display (see
"Basic RFFE interface settings and
●
The lower part allows you to define and apply test voltages and to execute voltage
and current measurements on the RFFE pins (see
"GPIO voltage and current mea-
The "Set" button activates the "Output Voltage" and "Range" ("Shunt" resistance) set-
tings. The "Meas" button starts the voltage and current measurements.
Channel Config softtool
