GUI reference
R&S
®
ZNA
444
User Manual 1178.6462.02 ─ 20
value of the range before the active range to the "Start Stimulus" value of the active
range. Its ripple limit is estimated according to the measured ripple of the trace in
the created range. The range numbers in the list are adapted.
If no range is active, "Insert" is equivalent to "Add".
●
"Delete" removes the selected range from the list.
●
"Delete All" clears the entire range list so it is possible to define or load a new rip-
ple limit line.
●
"Align All" redefines existing sweep ranges such that they cover the overall sweep
range and have (almost) equal width. The ripple limits are estimated according to
the measured ripple of the trace in the created ranges.
Remote command:
CALCulate<Chn>:RIPPle:CONTrol:DOMain
CALCulate<Chn>:RIPPle:DATA
CALCulate<Chn>:RIPPle:DELete:ALL
Recall Ripple Test.../Save Ripple Test...
The buttons open an Open/Save File dialog to load a ripple limit line from a ripple limit
file or store the current ripple limit configuration to a file.
Ripple limit files are ASCII files with the default extension
*.ripple
and a special file
format. See
Chapter 4.4.1.5, "File format for ripple limits"
Remote command:
MMEMory:LOAD:RIPPle
MMEMory:STORe:RIPPle
5.6.3
Circle Test tab
Defines circular limit lines for complex trace formats ("Polar", "Smith", "Inv Smith"), vis-
ualizes them in the diagram and activates/deactivates the circle limit check.
Most of the control elements in the "Circle Test" tab are disabled if the active trace has
a cartesian format.
Background information
Refer to
Chapter 4.4.1.3, "Circle limits"
Lines softtool
