R&S 1332.4500K22, User Manual

Page: 374 / 1709

GUI reference
R&S
®
ZNA
374 User Manual 1178.6462.02 ─ 20
Remote command:
[SENSe<Ch>:]FREQuency:MDELay:CONVersion
5.3 Format softtool
The "Format" softtool allows you to define how the measured data is presented in the
diagram area.
Access: Trace – [Format]
Measured quantities and display formats
The analyzer allows arbitrary combinations of display formats and measured quantities
(see
Chapter 5.2, "Meas softtool" , on page 300). Nevertheless, to extract useful infor-
mation from the data, it is important to select a display format which is appropriate to
the analysis of a particular measured quantity.
An extended range of formats is available for markers. To convert any point on a trace,
create a marker and select the appropriate marker format (see
"Marker Format"
on page 454). Marker and trace formats can be applied independently.
Background information
Refer to the following sections:
●
Chapter 4.2.3, "Trace formats" , on page 113
●
Chapter 4.2.3.3, "Measured quantities and trace formats" , on page 121
dB Mag
Selects a Cartesian diagram with a dB scale of the vertical axis to display the magni-
tude of the complex measured quantity.
Format softtool