GUI reference
R&S
®
ZNA
356
User Manual 1178.6462.02 ─ 20
Measurement
The "Measurement" section gives access to the custom traces of the loaded plug-ins.
Each external DLL
<ext_dll_name>.dll
that provides at least one custom trace
type, adds a measurement button "<ext_dll_name>" (with dotted left border) to the
"Measurement" section of the "External DLL" tab. If neither the PAE plugin nor any cus-
tom external DLL is installed, the "Measurement" section is hidden.
Tapping (clicking) or dragging & dropping a measurement button to the diagram area,
opens an additional
As usual, tapping (clicking) redefines the current trace while dragging & dropping cre-
ates a trace.
Power Added Efficiency ← Measurement
This button is part of the PAE plugin, which is pre-installed on instruments shipped with
firmware V2.15 or higher, and that can be installed on any instrument running firmware
V2.15 or higher. It opens the
Power Added Efficiency (PAE) dialog
.
5.2.12.2
External DLL Configuration Dialog
In the "External DLL Configuration" dialog, you can add/remove
to/from
the firmware. If a plugin requires interaction with an external device, you can define its
address from here.
To add/remove external DLLs, the firmware has to be run as administrator.
(Close the analyzer GUI, tap and hold the "R&S ZNA Vector Network Analyzer" icon on
the desktop and select "Run as administrator"
Loaded DLLs table
Displays the loaded plug-in DLLs and their configuration in the current channel.
Remote command:
Active ← Loaded DLLs table
Allows you to de-/activate the respective plugin in the current channel. An active plugin
can be used to
Meas softtool