R&S 1332.4500K22, User Manual

Page: 317 / 1709

GUI reference
R&S
®
ZNA
317 User Manual 1178.6462.02 ─ 20
Background information
Refer to the following sections:
●
Chapter 4.3.5.1, "Wave quantities" , on page 131
●
Chapter 4.3.5.2, "Ratios" , on page 132
The notation for wave quantities follows the usual scheme of the vector network ana-
lyzer:
●
The a-waves are the outgoing/transmitted waves at the analyzer's test ports.
●
The b-waves are the incoming/measured waves.
●
The source port for the stimulus signal must be specified in addition.
●
The port number range covers all test ports of the analyzer.
Define
The controls in this section of the dialog allow you to set the "Wave" type, the "Receiv-
ing Port" and the "Source Port".
The latter is only available, if no external source is used (see "Use Generator as
Source" on page 318).
Meas softtool