R&S 1323.7600.02, Getting Started

Page: 27 / 48

Basic operation
R&S
®
ZCxxx
27 Getting Started 1177.5156.02 ─ 05
6.2 Configuration and measurement steps
Follow the connection sequence described in Chapter 5.1, "Connection pro-
cedure" , on page 22.
Configuring the measurement setup and measuring the DUT involves the follow-
ing steps:
1. Configuring the converter setup
2. Establishing the RF connections between the R&S ZNA and the converters
See Chapter 5, "RF connections" , on page 20.
3. Scalar power calibration and leveling (optional for S parameter measure-
ments)
4. System error correction, using a suitable waveguide calibration kit
5. Connecting and measuring the DUT
6.3 Configuring the converter setup
Convenient converter configuration is provided with software option R&S ZNA-K8,
which is available since R&S ZNA firmware version 1.90.
Once the R&S ZNA has registered your converters, the setup can be configured.
1. At the graphical user interface of the R&S ZNA , open the "Converter Configu-
ration" dialog (System – [Setup] key > "Frequency Converter" tab > "Fre-
quency Converter ...").
Configuring the converter setup