R&S 1322.8003K06, User Manual

Page: 452 / 555

Remote Control
R&S
®
FSPN
452 User Manual 1179.4363.02 ─ 01
Parameters:
<Directory> String containing the path and directory.
If you leave out the path, the command returns the contents of
the directory selected with
MMEMory:CDIRectory
on page 452.
The path may be relative or absolute. Using wildcards ('*') is
possible to query a certain type of files only.
MMEMory:CDIRectory <Directory>
This command changes the current directory.
Parameters:
<Directory> String containing the path to another directory.
The path may be relative or absolute.
MMEMory:COMMent <Comment>
This command defines a comment for the stored settings.
Parameters:
<Comment> String containing the comment.
Example: MMEMory:COMMent "ACP measurement with Standard
Tetra from 23.05."
MMEMory::MMEMory:STORe1:STATe 1, "ACP_T"
As a result, in the selection list for recall settings, the comment
"ACP measurement with Standard Tetra from
23.05."
is added to the ACP entry.
Manual operation: See " Comment " on page 191
MMEMory:COPY <FileName>, <FileName>
This command copies one or more files to another directory.
Parameters:
<FileName> String containing the path and file name of the source file.
<FileName> String containing the path and name of the target file.
The path may be relative or absolute.
MMEMory:DATA <FileName>[, <Data>]
MMEMory:DATA? <FileName>
This command writes block data into a file. The delimiter must be set to EOI to obtain
error-free data transfer.
When you query the contents of a file, you can save them in a file on the remote con-
trol computer.
Managing Settings and Results