R&S 1129.7246.03, Operating Manual

Page: 680 / 855

Operating Manual 1302.6163.12 - 03 6.241
R&S ESU Remote Control – Description of Commands
SYSTem Subsystem
SYSTem:ERRor:CLEar:ALL
This command deletes all entries in the table SYSTEM MESSAGES.
This command is an event and therefore has no query and no *RST value.
Example:
"SYST:ERR:CLE:ALL?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
SYSTem:FIRMware:UPDate <path>
As of firmware version 4.5x it is possible to update base system and applications in one single step.
The structure of the update folder has to look like:
Extract the ZIP file containg the files needed for an update including the folder structure. Create the
required sub folders on the instrument and copy all the files from all sub folders onto the instrument.
Now start the remote update.
Note that in some environments instead of the ’\' character, a special escape character may be
required, e.g. '\\' for C/C++ programming language.
Example:
"SYST:FIRM:UPD 'D:\USER\FWUPDATE'"
'Starts the firmware update from directory D:\USER\FWUPDATE using the files of
the subfolders DISK1 to DISK<n>, including the contents of the EXTENSION
subfolder.
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
This command is an 'event' and therefore has no query and no *RST value.