R&S 1129.7246.03, Operating Manual

Page: 334 / 855

Operating Manual 1302.6163.12 - 03 4.303
R&S ESU Instrument Functions
Basic Settings
DELETE FILE The DELETE FILE softkey sets the focus on the File Name field to enter the file
name to be deleted. Alternatively the file to be deleted can be choosen from the
Files list. A message box opens to confirm the deletion.
Remote command:
MMEM:DEL "test03"
NEW FOLDER The NEW FOLDER softkey opens an on-screen keyboard to enter a new folder
name.
DEFAULT
CONFIG
The DEFAULT CONFIG softkey establishes the default selection of the data subset
to be saved and outputs DEFAULT in the ITEMS field of the SAVE/RECALL DATA
SET table.
Remote command:
MMEM:SEL:DEF
STARTUP
RECALL
The STARTUP RECALL softkey activates the selection of a data set which is auto-
matically loaded when the instrument is powered on and after PRESET . For this pur-
pose the Dialog Startup Recall is opened (analogously to DATA SET LIST).
The field Files lists all data sets stored in the selected directory. The currently
selected data set is checked.
In addition to the data sets stored by the user, the data set FACTORY , which speci-
fies the settings of the instrument before it was last switched off (Standby), is always
present (when unit is delivered).
To select a data set, the entry focus is set to the corresponding entry by means of
the rotary knob and the data set is activated by pressing the rotary knob or the
ENTER key.
If a data set other than FACTORY is chosen, this data set will be loaded when the
unit is switched on or after pressing the PRESET key. Any settings can be assigned
to the PRESET key.
Remote command:
MMEM:LOAD:AUTO 1,"D:\user\config\test02"