RISE ABOVE
4. Removing the e-prom
Before returning the transmitter, you must remove the e-prom from the transmitter to be installed into the new
unit. First locate the e-prom on the back of the transmitter (Figure 4.1). Remove the two screws and gently pry with
a small size screwdriver (Figure
4.2). Place the e-prom somewhere safe since the new transmitter will not be able to communicate with your
existing receiver without it.
Figure 4.1
Figure 4.2
R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
PH: 937-328-5100
www.rmhoist.com
