IMPORTANT SAFETY INSTRUCTIONS
1. WARNING: To prevent injury, follow safety precautions below:
READ & FOLLOW ALL SAFETY INSTRUCTIONS
2. DANGER: To prevent possible electrical shock, special care should be exercised since water is
involved in the use of this product. Read each below and do not attempt to repair by yourself,
contact R&J to find an authorized service center location or discard the product:
A.
If the light falls into the water, DO NOT reach for it! First unplug the light and then pull it
from the water. If the light is getting wet at all unplug it immediately.
B.
If the light shows any sign of abnormal water leakage, immediately unplug the light.
C.
Examine the light after install. It should not be plugged in if there are visible signs of
water on parts.
D.
Do not operate the light if the cord or plug is damaged, or if the light is malfunctioning
or been damaged.
E.
To avoid the light cord from dripping water into your outlet receptacle, position the
cabinet and tank to one side of wall receptacle. A "drip loop," shown below, must be
used when plugging in any portion of the Fusion Series into a wall receptacle.
3. Use of this product near children requires
careful supervision.
4. To prevent injury, do not touch moving
or hot parts such as bulbs or lamps.
5. Always unplug the product when not in
use, before adding or removing parts, and
prior to cleaning. To unplug grasp plug
and pull to unplug, never yank by cord.
6. Make sure the light is securely mounted
prior to operation.
7. Read and follow all important notices on
the light.
8. The product must be plugged into a
receptacle that is controlled by a GFI
(Ground Fault Interrupter)
9. Do not cover lights as overheating could
occur.