R&H DPi 500, User Manual

Page: 8 / 12

ENTER
PARAMETER
PREV/NEXT
RJ45
POWER
Reference Manual
Page 14
Reference Manual
Page 5
FUSH FUSH
1 Welcome
Thank you for choosing DPi. professional audio product. You have joined a growing group of audio professionals who
have turned to DPi for the most advanced audio amplification products available. So welcome to the DPi family! All
DPi products have been designed, engineered and manufactured to meet the demands of even the most critical
sound reinforcement professional.
Please read this manual carefully. It contains important and helpful information to enable you to get the maximum
performance out of your new product. If you plan to use this amplifier in either of the 2 available Mono modes, please
refer to section 2.2.
1.1 Unpacking
Please unpack and inspect your new amplifier for any damage that may have occurred during transit. If damage is
found, notify the Transportation Company immediately. Only you, the consignee, may initiate a claim with the carrier
for damage which occurred during shipment. Remember to save all packing materials in the unlikely event your unit
should ever need to be returned to the factory for service of any kind.
1.2 Features
High power density, up to 3000 watts in a 2U chassis.
□
Onboard DSP with 24-bit, 96 kHz Burr-Brown A/D and D/A converters.
□
Pushbutton presets simplify setup. Custom presets for various loudspeakers can be downloaded.
□
LCD Control Screen is used to adjust the amplifier's attenuation and muting, configure the amp, set up and view
error monitoring, and recall DSP presets to reconfigure the amp for various applications.
Light weight due to aluminum chassis, special internal construction and switching power supply.
□
The rear rack ears have a built-in EZ-Rack Pin for easier installation.
□
Advanced protection circuitry guards against: shorted outputs, DC, mismatched loads, general overheating,
under/over voltage, high-frequency overloads and internal faults.
□
One-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its
specifications.
□
□
□
Thermal management controller and two discrete thermal zones with variable-speed fans, forced-air cooling.
7. Dowhoad data to Device. Choose
‘
Program
’
menu ------
communications then choose the program from PC and which memory you want
to put at the device
program 20 to 30 is protected , you can down data to these 10 memories with ***
input password .
please get the password from your dealer
8. Upload data from device, firstly the data will be uploaded when connecting to
device, only the current
using data to
“
work
”
page , you also can choose
‘
upload from device
’
from
the menu------ communications,
and do the some process as 8.
DPi Series DPi Series
ENTER
PARAMETER
PREV/NEXT
RJ45
POWER
DPi900