R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
6
PLACE THE REAR LIGHT ONTO AND ALIGNED WITH HOLES IN THE LICENCE
PLATE BRACKET AS SHOWN IN PICTURE 14.
OFFER THIS ASSEMBLY UP TO THE MOTORCYCLE AS ORIGINAL AND SECURE
USING THE THREE LONGER (55mm) M6 BUTTON HEAD BOLTS IN POSITIONS
SHOWN IN PICTURE 6.
REFIT THE KEY-LOCK CABLE AS ORIGINAL (SHOWN IN PICTURE 5).PLEASE
ENSURE THE KEY-LOCK MECHANISM IS CORRECTLY WORKING BEFORE
REPLACING THE SEAT.
RECONNECT THE MAIN WIRING PLUG SOCKET AND SECURE THE CABLES AS
ORIGINAL WITH CABLE TIES.
IT IS A GOOD IDEA TO CHECK OPERATION OF ALL LIGHTS AND SEAT CATCH
AT THIS TIME.
REFIT BOTH EXHAUST COWLS AS ORIGINAL.
REFIT THE REAR SEAT COWL AS ORIGINAL.
REFIT SEAT.
REFIT LICENCE PLATE (IT MAY REQUIRE DRILLING).
IMPORTANT: IF FITTING A FULL-SIZE LICENCE PLATE AND PLACING IT
FAR DOWN ON THE LICENCE PLATE HANGER, THERE IS A SMALL CHANCE
OF THE LICENCE PLATE HITTING THE BACK WHEEL UNDER HEAVY LOAD
AND OVER LARGE BUMPS IN THE ROAD. IT IS YOUR RESPONSIBILITY TO
CHECK FOR THIS POSSIBILITY AND TAKE AVOIDING ACTION. FAILURE TO
CHECK THIS COULD RESULT IN SERIOUS INJURY.
DEPENDING ON LOCAL LAWS, ATTACH ENCLOSED REFLECTOR IN AN
APPROPIATE LOCATION.
RECHECK THE LICENCE PLATE ILLUMINATOR AND ALL LIGHTS BEFORE
RIDING.
ISSUE 1 07/09/2011 (NSY)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design
changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The
Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those
in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for
its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify
any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the
motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option either supply a
replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise
than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or
neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be
liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or
the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were
purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-
sellable condition, in the opinion of R&G Racing. All returns are subject to a 25% restocking and handling fee (25% of the gross value
exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of
discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty
goods.
