R&G
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU34 3AQ, UK
Tel: +44 (0)870 220 6380 Fax: +44 (0)1420 521101
Email:
Instructions de montage pour ECS0126 Protection Carter Moteur
DUCATI PANIGALE V4, V4S & SPECIALE ’18- (Coté gauche uniquement)
L
A FAÇON DONT LE KIT EST EMBALLE NE CORRESPOND PAS FORCEMENT A LA FAÇON DE MONTER LES PIECES SUR
LA MOTO
.
Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir les
composants,
ces rondelles doivent être jetées.
Coté gauche assis sur la moto :
•
Enlever les 2 boulons qui fixent la protection carter moteur en place, photo ci dessus.
•
Si cela n’est pas déjà fait, placez le slider en plastique sur le bloc de métal.
•
Enlever le joint torique de la protection d’origine, et logez le dans la rainure circulaire sur le nouveau bloc de
métal.
•
Insérer les nouveaux boulons avec les rondelles à travers les sliders.
•
Monter l’ensemble sur la moto.
•
Serrer de façon égale aux couples spécifiques d’usine.
•
Mettre les stickers en gomme R&G.
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design
changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The
Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those
in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for
its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify
any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the
motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option either supply a
replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise
than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or
neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be
liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or
the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
R&G RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were
purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-
sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc.
P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of discontinued
products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty goods.
