unifiedbrands.net
13
Unit Operation – con’t.
Door Adjustment:
Roller bearings on bottom of each door may be adjusted to allow for proper seal of
glass door. To look for proper door sealing assure that the bumper gasket of each
door touches the entire vertical side of the door frame. No gaps should be visible
NOTE: The design of the bumper gasket does allow for a small 1/8” gap at
top of each door.
SERVICE CONNECTIONS:
High and low side refrigeration service connections are in compressor area in rear
of unit. Any repairs to the sealed refrigeration system should be performed by an
ASA or licensed refrigeration technician.
