SALES
@
RBWIRE.COM (800) 634-0555 RBWIRE.COM
ASSEMBLY INSTRUCTIONS
R
STEP
1
STEP
2
Slide pennant head onto vertical upright, with head
facing toward basket. Secure with short hex bolt and nut.
STEP
2
pg 2
STEP
1
Position vertical rack pole so end with two holes is on
bottom. Thread through inside of basket so it sits on
outside of base. Line up holes and attach with long
hex bolts and nuts. Tighten until bolt head engages nylon
lock on nut.
Single Pole Rack Assembly:
Double Pole Rack Assembly:
100, 200, 201, 350 SERIES
Wire Cart
Install vertical rack poles so end with two holes is on
bottom and poles bend outward. Thread through inside
of basket so they sit on outside of base. Line up holes
and attach with long hex bolts and nuts. Tighten
until bolt head engages nylon nut. Repeat for both sides.
Place crossbar between vertical rack poles and position
so tabs at end of crossbar are pointing up. Secure with
short hex bolts and nuts at each end.
HARDWARE INCLUDED
(Not to scale)
x3
Nuts
x2
Short hex bolts
HARDWARE INCLUDED
(Not to scale)
x6
Nuts
x4
Long hex bolts
x2
Short hex bolts
x1
Long hex bolt
*IMPORTANT*
