background image

Page 1

OBDII Converter Installation Instructions

1. Introduction

The OBDII converter kit is an off-the-shelf product from 
B&B Electronics. The OBDII converter enables the Rand McNally 
TND

 760 to connect to the OBDII data bus in light duty 

vehicles and passenger cars. 

This document describes how to connect the OBDII converter to 
the TND

™ 

760, and the operational considerations to be aware 

of when using the OBDII converter as part of your vehicle 
monitoring system.

Additional documentation can be found at 

www.randmcnally.com/OBDII.

 

B&B OBDII Converter Kit

 

Part Number: RMLDVSV2-KIT

 

Kit contains the following items:

 

1A.

  OBDII Converter   

 

1B.

  OBDII Converter Mounting Hardware (zip ties &

 

 

double-sided tape) (not pictured)

 

1C.

  OBDII Y Cable 

 

 

2.2 Required Items

1

2

Rand McNally TND

 

760 Flying Lead Cable   

with B&B Termination

Part Number: 052800655

2. Installation

2.1 Warnings

Rand McNally recommends that a professional automotive 
technician install the OBDII converter.

A common installation location is under the dash of the vehicle. 
The installer must be careful to secure the OBDII converter and 
any wiring in a location that will not interfere with the driver, 
the operation of the vehicle, or the operation of the airbag 
system. The installer must also consider the possibility that the 
mounting hardware may fail. Similarly, such a failure should not 
cause interference with the driver, the operation of the vehicle, 
or the operation of the airbag system. 

2

1A

1C

For use with your TND

 760 & Light or 

Medium Duty Cars or Trucks

Reviews: