ELDFLEETQSG-012417-v002
Download
Connect
On your Android device, launch the Play Store app
and search for
Rand McNally DriverConnect
to install
the Rand McNally DriverConnect app.
OR
On your Rand McNally Android tablet, launch the
Rand McNally Market app. Now, tap on
Apps for
Drivers and Fleets
. Locate the Rand McNally
DriverConnect app and install.
Next, register an account with Rand McNally using
the app.
Register
1. Open the Rand McNally DriverConnect app on your
phone or tablet
2. Follow the registration steps shown on the
Rand McNally DriverConnect app to register
Next, install the E-Log device in a truck.
Install
1. Locate the diagnostic port on the truck
2. Connect the cable shipped with DC 200
™
to the device.
Use the thumb screws to secure the cable to the device.
Align the plug at the other end of the cable with the pins
on the diagnostic port.
3. Press the collar on the plug toward the vehicle and turn it
clockwise to lock the device in place.
4. The device will flash a momentary white light when it
powers on.
5. The device will then flash a sequence of red lights to
indicate the following connection, in order: JBUS, GPS,
Bluetooth, Wifi, Cellular.
6. Turn on the truck ignition. When the JBUS connection is
detected by the device the first light in the sequence will
change from red to green.
7. When the device aquires a GPS signal, the second light in
the series will change from red to green. Please refer to the
user guide in the app for further flashing sequence details.
Next, connect the app to the E-Log device.
After registering an account or logging into the Rand McNally DriverConnect app, you will be presented with a screen to
connect to a device. Follow the device setup steps shown in the app to enable Bluetooth, WiFi and cellular internet
connection of the E-Log device. The device will show a solid green light to indicate the successful completion of
the installation.
randmcnally.com/support
877-446-4863
[email protected]
