RAMTONS RW/135, Instruction Manual

Page: 4 / 10

Connect: Push down the slide jacket of
speedy connector (4 small
balls must be exposed ),
insert it into the connection
socket and then push upward.
Release the connection of
water tap with speedy
connector is completed. If it
is required to feed water,
simply open the water tap.
Separate: Close the water tap, push
down the slide jacket of
speedy connector and pull
out the speedy connector.
Separate
+
+
7
Unscrew four screws of part
A and sleeve part A horizontally
over the mouth at the end of
water tap (the mouth at the end
of water tap must be flat and
smooth. Flatten it by filing if it is
not flat) and push it upward with
force making the rubber washer
firmly press the plane center of
water tap mouth. Then tighten
the screw sequentially.
After that, tightly screw on part B.
Push down the slide jacket to
expose the small ball and
enable separation of connector
socket from speedy connector.
! Remove package and take out the bottom
board of the cabinet on the foam cover.
! Open the lid of washer's door and take out
accessories.
! A trial operation or washing on the foamed
cushion is strictly forbidden.