3
bread, then let the toaster cool down and begin toasting the first slice.
USING YOUR TOASTER
1. Put bread slice into the bread slot, which can be inserted two slices at most every time.
If only toasting one side or irregular bread, the bread must be put on the toast rack
which only can be toasted one piece every time. When toasting on the toast rack, raise
rack control handle to make it uplift, then put the bread on the toast rack. Press down
the rack control handle to reset the rack when not in use.
NOTE: 1). Make sure the crumb tray is completely positioned in place before using.
2).Before toasting on the toast rack, let the appliance cool down.
2. Plug the power cord into the outlet.
3. Set color control knob to your desired color. There is 7-position level (see fig.1), the
lowest
“1”
is for light and the highest
“7”
is for dark. The bread slice can be toasted to
golden color at the middle position.
NOTE: 1). Toasting color for one slice is darker than that for two
bread slices at the same level.
2). If toasting continuously, toasting color for the latter
bread is darker than that for the anterior bread at the
same level.
3) Please use 1 to 3 position for toasting one slice bun bread for toast rack in
the center.
4. Lower carriage handle down vertically until it is latched in place, the indicator of
Cancel
will be illuminated, and the appliance will begin toasting at once.
NOTE: The carriage handle can only be latched when the appliance is plugged in.
5. Once the bread has been toasted to the preset color, the carriage handle will
automatically pop up. Also you can uplift the carriage handle a little to remove the bread
readily (see fig.2).
NOTE: During toasting, you may also observe the toasting color. If it is
satisfactory, you can press the Cancel button to cancel the operation at any
time, but never lift carriage handle to cancel toasting.
6. If you want to toast frozen bread, firstly press
Defrost
button and the
indicator of
Defrost
button will be illuminated, set color control knob to your
desired color, and then lower carriage handle down vertically until it is latched
Fig.1
Fig.2
