PART FIGURE
2
ASSEMBLY OF BASE
1. Detach screw from base of the fan.
2. Match locking tab to base and click into position.
3. Tighten the screw in the base to secure the fan to the base.
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between
the real object and the illustration in the drawing shall be subject to the real subject.
[01]x1
[03]x1
[05]x1
[02]x1
[04]x1
[06]x1
[08]x1
[07]x1
[09]x1
OPERATING INSTRUCTION
This Fan can be operated by the manual controls located at the bottom of the column.
1) POWER button
> Press once to turn on the fan, press the second time to turn off the fan.
[09]
Circlip
Front grill
Rear grill
Blade
Motor shaft
Motor
Pedestal
Base
Screw
Control panel
Spinner
GRILL & FAN BLADE ASSEMBLY
1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the
plastic nut counterclockwise to remove both of them. Fix the rear grill to the
motor then tighten the plastic nut again. (Fig.1)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove
of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig.2)
3. Fix the front grill and the rear grill with circlip clip and then use the fasten clip to
tighten the fan grill. (Fig.3)
Fig.1
Fig.2
Fig.3
Oscillating clutch knob