4
2. Close the lid. Position the kettle on the power base in place. Make sure the
kettle contact with the power base completely.
3. Connect the plug into a power outlet. Press down the switch to
“I” position and
the switch light illuminates. Then start to boil the water. The kettle will switch
off automatically once the water has boiled and the switch light extinguishes.
You can shut off the power by pressing the switch at any moment during
boiling water.
NOTE
：
Ensure that switch is clear of obstructions and the lid is firmly
closed. The kettle will not turn off if the switch is constrained or if the lid
is left open.
4. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as
boiling water may result in scald, besides, don’t open the lid while the
water in the kettle is hot.
5. The kettle will not re-boil until the switch is uplifted. Allow to cool for 15~20
seconds before reopening to boil water. The kettle may be stored on the power
base when not in use.
NOTE
：
Ensure power supply is turned off when kettle is not in use.
Boil-dry protection
Should you accidentally allow the kettle to operate without water, the boil-dry
protection will automatically switch it off. If this should occur, allow the kettle to
cool before filling with cold water and re-boiling.