4
4.
You can turn the speed selector to the desired setting or hold on the “M” position if
want to accelerate the process of blending.
Note:
The appliance allows you to chop the maximum quantity of coffee
beans is 50g. Do not overfill the Cup.
5.
Allow the blade stop running before removing the Cup Unit.
6.
Disconnect the supply once finished. Disassemble the Cup Unit and
remove the Cup Base. Then empty the bowl and serve.
7.
Do not run the appliance for more than 1 minutes per time. Minimum 5
minutes rest period is required between two consecutive cycles.
WARNING:
1.
Never operate the appliance more than 15 seconds per time without load.
2.
Blades are very sharp. Handle with care.
CLEANING AND MAINTENANCE
You can clean the appliance as follows:
-Pour a little warm water into the jar and turn the Speed Selector to M position for a few
seconds.
-Remove the jar and rinse under running water.
-Wipe the outer surface of Motor Unit with a damp cloth, do not use abrasive cleansers.
Warning: Never immerse Motor Unit in water for cleaning and all parts are not dishwasher
safe!.
-Dry all parts and then replace them
If any problems have been encountered during use never disassemble the Motor Base by
yourself. Contact only the authorized service facility for examination and repair.
Environment friendly disposal
You can help protect the environment! Please remember to respect the local
regulations: hand in the non-working electrical equipments to an
appropriate waste disposal center.
Fig 5
